Checking bearing while machining rear carrier.JPG |
Construction of the car rear view.JPG |
CV joint tripod with hub.JPG |
CV Tripod after first machine step.JPG |
CV tripod with chain, sprocket, and differential.JPG |
Differential housings new and old.JPG |
Drivetrain Test Fit 2.JPG |
Drivetrain test fit.JPG |
Dry sump oil pan bottom.JPG |
Engine in bare chassis with roll bar.JPG |
Front Bulkhead Single 4 Inside 1 half.JPG |
Front suspension upper view.JPG |
Gears in new differential housing.JPG |
Headers 1.JPG |
Headers 2.JPG |
Left carrier bracket 2.JPG |
Left carrier bracket.JPG |
Machining parts in the VF4.JPG |
Machining rear bulkhead.JPG |
Machining tripod.JPG |
New differential housing next to old.JPG |
Rear bulkhead during machining.JPG |
Rear bulkhead in mill after facing.JPG |
Rear corner full test fit.JPG |
Rear drive mockup.JPG |
Rear drivetrain mockup.JPG |
Round stock for CV tripod housing in fixture.JPG |
Shock with test spring.JPG |
Sinusoidal spline on cv tripod.JPG |
Some of V35 team.JPG |
Steering rack center before assembly.JPG |
Steering rack cut away view.JPG |
Stock for CV tripod.JPG |
Stub alxes in Titanium and Aluminum.JPG |
Suspension Mockup.JPG |
Test fit rear carrier mounts before bonding.JPG |
Three stages of rear bulkhead 1.JPG |
Top view of differential gears in new housing.JPG |
Travis final fitting of chassis during bonding.JPG |
Tripod housings with splines.JPG |
Tripod with chain and sprocket.JPG |
Upright on chassis.JPG |
V35 Chassis.jpg |
V35 Team Leaders.JPG |
